Home Products Recumbents List by Type Trikes Cycle Genius Phoenix (2008)
Cycle Genius Falcon (2008)Cycle Genius Raven (2008)

Cycle Genius Phoenix (2008)
View Full-Size Image

Cycle Genius Phoenix (2008)

Price: $1,999.00

Cycle Genius designed this trike to be a mobility extender for folks that want the extra stability of a three wheeled machine but don't want a seat that is too close to the ground.

The seat is at chair height. This means that you will not have to fall into or climb out of it.

A clean timing chain turns the mid-drive crank. By doing this, CG was able to keep all of the gears shifting at the rear of the bike. So, the shorter drive chain has quick, smooth shifting. CG replaced the traditional front derailleur with a Sram Internal 3-speed hub to allow range shifting to be done without pedaling.

Front brakes and shifter controls are on one side. Both front disc brakes are controlled by a single self balancing lever. The rear derailleur and the internally geared rear hub are also controlled by a single twist grip lever assembly. This unique setup allows the controls to be mounted on either side.

The rear brake is controlled by a separate lever that has a special locking feature to prevent the bike from rolling. This is helpful when entering and exiting the bike.

Strong wheels are a necessity.  Tough double wall rims and strong hubs with 20mm axles are wrapped with durable 100psi tires.

This Bike is Ready for Anything! - Short Rides or Long Tours!


And since comfort begins with fit, raise or lower the stem and point the handlebars to the front or back. It's up to you!


Slide the seat forward or back, tilt the seat base up or down and then elevate the angle of the seat back or lay it back with quick micro adjust clamps.


  • Frame - 7000 Series Aluminum Alloy
  • Rims - Alex DA-16 26˜Rear & 20˜Fronts
  • Hubs - Fronts - Down Hill Alloy w/20mm alloy quick release levers
  • Rear - SRAM DualDrive 24 (3 Internal, 8 External) w/ disc brake
  • Spokes - Stainless Steel 14ga. 32° Rear & Fronts with Brass Nipples
  • Tires - Kenda Kwest Black Side Wall 100psi
  • Pedals - Alloy Cast Body with 9/16" axle
  • Crank - Alloy 170mm w/36t chainring & alloy chain guard
  • Mid-Drive - Custom Freewheeling 39x39t chainring assembly
  • Chain - KMC 8-speed
  • Rear Cogs - SRAM PG-850 PowerGlide 11-32 (8 Speed)
  • Bottom Bracket - Cartridge sealed bearing
  • Rear Derailleur - SRAM Dual Drive, 1:1®actuation ratio
  • Shifters - SRAM Dual Drive 3x8 (single sided mount) 24 Speed
  • Handlebars - Custom Alloy Bars w/20mm Rise
  • Stem - Custom Speedlifter™ (Adjustable Height and Angle Control)
  • Headsets - Sealed Mechanism
  • Brake Calipers - Avid BB-5 Disc Brakes w/160mm Rotors on all Wheels
  • Brake Levers - Both are Alloy Body and Lever with Return Spring
  • Front - Twin Equal Pull
  • Rear - w/Parking Brake
  • Seat - 6 Way Adjustable w/Custom Molded Foam Padded Base & Mesh Seat Back w/Adjustable Angle
  • Accessories - Reflectors & Fenders
  • Colors - Blackened Green
  • Size - One size fits most Riders 4'1" to 6'8"

Recently Viewed Products

more categories







Stop by the Shop

RBR storefront

1306 S. Atherton St.
State College, PA 16801
(814) 234-4636


Hours (EST)

SUN Closed

Learn more...

Customer Quotes

" For preparation, price and service I can highly recommend a recumbent purchase from Recumbent Bikeriders. "

Jay M. "BentJay" Singer